Keep hair, jewelry, clothing, and foreign objects away from the printer mechanisms. Use only three-wire earth-grounded power cords with this printer. The leading edge of the media must wind clockwise. Asia Pacific and Oceania. To load roll media, start with step 1 below.
||22 August 2018
||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
||Free* [*Free Regsitration Required]
The Receiving light flashes while the plot is being processed; then the printer starts printing. Print spooler configuration examples Example 1: The media cutting knife used in the pus step is sharp.
HP DesignJet 750c plus – large-format printer – color – ink-jet
With the nonmetallic edge angled to the right, firmly push the module into the slot. Except on glossy media types, the printer will operate successfully in monochrome with just the black cartridge loaded; these instructions assume that you are loading all four cartridges.
You must assign a name to each printer or printer managed by the print spooler. If you do not know whether your application sends PostScript R files to the printer and therefore whether the printer may require the PostScript Upgrade Kitconsult your application software and its documentation.
Check that you have all of the required 7500c You need the following items, which were supplied with the printer:. Make sure that the leading edge of the media is outside the roll cover, and then close the cover.
Print a demonstration plot optional Before you connect your printer to a computer, it is a good idea to print one of the internal sample plots. Plain paper, high-gloss film, continuous forms, translucent paper, glossy film, bond paper, coated paper, heavy-weight coated paper, high-gloss photo paper, matte film, pls paper, glossy paper.
HP DesignJet C Plus | eBay
Push it far enough to be firm, but do not use excessive force, as this may break the tabs. On sheet media, wait until the ink is dry, if necessary see the front panel display for an pous messageand then gently pull the sheet out from the printer.
This ensures that the printer itself is operating properly.
Laptops by Dan Ackerman Sep 25, Looking for a tech bargain real soon? Now you can set up the printer, completing each task explained in this document. Keep hair, jewelry, clothing, and foreign objects away from the printer mechanisms.
To switch on and change the language Make sure that the power switch on the front of the printer is Off. For other applications, see below for advice, and if necessary, contact your software vendor. Use their documentation to find the requirements.
The sequence of the colors is, from left to right: To achieve the best performance from your printer, we recommend you use only genuine HP interface cables, whose reliability and performance have been thoroughly tested to give trouble-free performance.
Depending on your needs, you may want to use the network interface instead of, or in addition plux, the parallel and serial interfaces. The software results page for your printer displays with the default operating system selected.
Make certain that the power cord supplied with your printer matches your AC power connection requirements. For example, from the command line of a shell, type: Environmental Parameters Min Operating Temperature. Large Format Printer Size. Connecting the printer directly to a network You can connect your printer directly to a Local Area Network using an optional network interface card, such as the HP JetDirect Print Server.